How does the high-code automatic labeling machine make the label stick firmly

2026-01-09 Click： 12

share

• 
  Facebook
• 
  Linkedin
• 
  Tumblr
• 
  VK
• 
  Pinterest
• 
  Copy link

The automatic labeling machine is specially designed and manufactured according to the process and technical requirements of the high-speed automatic labeling machine. The control system is controlled by today's advanced computer programmer, driven by a high-performance stepper motor and advanced driving method, and the full Chinese LCD display has clear display of various states and parameters.

The automatic labeling machine can automatically roll and paste the adhesive labeling paper evenly on the bottle body. In case of a shortage of bottles, the machine's control system can ensure that no label paper is sent out, effectively preventing waste of label paper, and can make stepless adjustments to the production capacity according to the specifications and characteristics of bottles and labeling paper. The rolling device of this machine can mark the glass mold bottles with uneven surfaces with relatively flat marks.

So how to increase the viscosity of the label and make it stick as firmly as possible? You can do the following:

1. Improve the surface quality of the attached hose. The surface of most products is over-polished, which will increase the difficulty of labeling. The exudation of contents, micropores on the tube wall, etc. will cause the label to tilt. How to avoid such problems should be a more important issue for everyone to consider.

2. Control the labeling pressure during the labeling process.

3. Control the temperature during the labeling process. Increasing the labeling temperature will improve the labeling effect, because as the temperature increases, the activity of the substance inside the object will increase, making it easier for the label to integrate with the tube body.

The labeling process is prone to generate static electricity, which will have an impact on the labeling effect. Properly increasing the humidity at the labeling site will improve it to some extent. Using ion fans is also an effective solution. Make the bottom end of the label into an arc and try to avoid the tail sealing deformation area. Of course, the arc cannot be opened too deep, otherwise the problem with the label itself may easily cause wrinkles and increase unnecessary trouble. For special-shaped tail sealing, the shape of the label is required to be changed accordingly, which can not only avoid hikes but also increase the aesthetic feeling.

I hope the above content can help everyone better understand the high-code automatic labeling machine.